Best cheap antenna analyzer: Reviews and buying advice 1

Best cheap antenna analyzer: Reviews and buying advice

Are you looking for cheap antenna analyzer ?. Here are our pick for cheap antenna analyzer. You can quickly check the list below and scroll down for the detail list to read more detail about the product and reviews from other customers.

Quick list for comparison:

Detail List for cheap antenna analyzer:

Loutsbe Amplified HD Digital TV Antenna,Indoor HDTV Digital Antenna 80 Mile,Support 4K 1080P Fire tv Stick&All Older TV's HDTV Antenna with Switch Amplifier Signal Booster-Freeview Life Local Channels

$22.97  in stock
Buy Now
Best cheap antenna analyzer: Reviews and buying advice 2 Amazon.com
as of December 18, 2019 6:41 pm

Features

Brand NameLoutsbe
Item Weight10.4 ounces
Product Dimensions12.9 x 9 x 2 inches
Item model number43237-2
Batteries1 AA batteries required.
Color NameModel-6
Specification MetFCC
Special FeaturesVisit http://dtv.gov/maps to confirm available channels., Areas with large obstructions such as valleys, mountains, etc, will reduce effective range.Note: Always remember re-scan for channels after moving the Antenna. It also depends on your living quarters. If your in a apt. in an old brick or metal building, and you don't have windows,you will not get much. If your in a city, have many windows you can get over 50 channels. Sometimes just a inch or so in different directions. Try different locations, put the antenna up as high as you can.

FREE HD CHANNELS FOR LIFE and Support All Older TV's : Never pay your cable or satellite for television again Loutsbe Skywire TV Antenna can pull in all of your local news, weather, sitcoms, kids and sports programs absolutely FREE, like NBC Live, ABC,PBC, CBS, CW, FOX, CNN USA News, just connect...

User reviews

 I like that this antenna is light weight.--- It has a long chord that will reach windows where you can get the most of your viewing experiences...--- The picture quality is nice and works great with HD broadcasting.--- It has a large receptor plane which is nice BC it is attractive and never an eye sore!--- If you spend the time to understand the technology- you will grow to love this NIFTY antenna...--- The antenna works well with my LG smart TV, the TV has CH+ so the Antenna is more than able to comply with all demands.We love the football games on our 43" TV- the Picture quality- is outstanding and the refresh rate is never a problem with this antenna...The antenna works well with my LG smart TV, the TV has CH+ so the Antenna is more than able to comply with all demands.I also like that the seller provides excellent services after the sell.
Great amplified had digital antennae. It helps us get the local stations and some others in clearly. It’s easy to set up. We are pleased with this purchase.
 🤓We love how easy to install this antenna is!We were able to hide it very nicely behind our real size "Van Gogh" 😌We were surprised how even with the antenna working so well even hidden behind the painting , we were afraid of having an ugly black square in the middle of a white wall! 🤪We got many channels without the cable bill😉 , it is great with the sports channels and news ones! the image was really nice and sharp all the time!🤩👍🏻Tip: to know which channels you can get go to "antenna web dot org" 😎💃🕺Great, great antenna! the price was more than excellent! Cheers!

View all reviews

SWR Antenna Analyzer MFJ-259C HF VHF 0.53-230Mhz

$279.89  in stock
Buy Now
Best cheap antenna analyzer: Reviews and buying advice 2 Amazon.com
as of December 18, 2019 6:41 pm

These is a compact, battery-powered RF impedance analyzers. They combine four basic circuits; a 0.53-230 MHz variable frequency oscillator, a frequency counter, a 50 ohm RF-bridge, and an 8-bit micro-controller. These analyzers make a wide variety of useful antenna or impedance measurements,...

User reviews

I had an antenna that was just not cooperating no matter what I did to it. I had put almost two weeks of time and frustration into trying to tune the antenna. I was getting conflicting symptoms, and didn't know what I needed to do next. So in desperation I purchased this antenna analyzer.With the info it gave me I was able to get the antenna tuned for the correct frequency, and the SWR was down to 1:1.2, within half an hour.It saved my sanity.
The unit was adequately packed but when I unwrapped it there was a rattle coming from inside the analyzer. Opening the unit showed a single screw rolling around. A quick look did not show source (not the usual battery tray). One of the intended uses for the Analyzer was to tune a new Hy-Gain AV680 multi band vertical. When the Analyzer was connected to the antenna I noticed that the tuning knob was very sensitive to touch. The frequency wound jump around with pressure on the knob. Also ANY pressure on the input connecter would cause the meters to show no connection. So, I needed to find where the screw came from. A more thorough search (removed battery tray) showed it was one of three screws that are supposed to hold the air variable tuning cap bracket to the circuit board. Replaced the screw and tightened the other two (both loose). The freq was now stable. The input connecter still had a problem. There is a small gauge wire connecting the center connecter pin to the circuit board. Apparently this wire is attached to the center pin first then the circuit board is mounted leaving a small gap between it and the pin. The wire is sharply bent up through a notch in the board and soldered to the board. There were several nicks in the wire, one of these produced an intermittent break when a PL259 was inserted. Connecting a tinned 16ga solid wire from the connecter pin to the circuit board solved this problem. I then finish tuning my vertical antenna without any more problems. So it appears , after surgery, I now have a viable Analyzer. Really no excuse for loose hardware the nicked wire maybe. This problem too could be easily corrected however on future units. Harry S
I would have liked to afford a high dollar analyzer with graphing and computer connectivity options but, I just needed to tune some antennas for HAM use.The 259c is easy to use, the tuning dial is a bit jittery when trying to tune a specific freq but it will do the job. I was able to tune up a 10m and 2m antenna on the truck quickly using the 259c, much faster than the old key the mike and adjust method and being able to sweep the band made it easy to adjust the sweet spot for the frequencies you'll most use.I also tuned up a couple of dipole antennas I built, one for 20m and one for 40m. This made it very easy to adjust the length for just the right part of the bands I use, getting a 1.1:1 match was easy.This does chew through batteries. Get some lithiums and save yourself money in the long run. The trickle charger built in is NOT intelligent so you can overcharge the batteries.All in, this is worth the price and for the casual user like me and does what I need it to do.

View all reviews

Rig Expert AA-230 Zoom 100kHz-230MHz Antenna Analyzer

$430.00
$404.95  in stock
Buy Now
Best cheap antenna analyzer: Reviews and buying advice 2 Amazon.com
as of December 18, 2019 6:41 pm

Features

Product Dimensions7.2 x 3.2 x 1.3 inches ; 8.3 ounces
Shipping Weight1.2 pounds (View shipping rates and policies)

RigExpert AA-230 ZOOM Antenna Analyzer 100kHz to 230MHz The analyzer is designed for measuring SWR (Standing Wave Ratio), Return Loss, Cable Loss, of cable and antenna systems from 100 kHz to 230 MHz. A built-in ZOOM capability makes graphical measurements especially effective. An integrated Time...

User reviews

I know, it's a bit costly... but it's one of those things that, hopefully at least, you only have to buy once. I LOVE it. This is my first antenna analyzer. I was initially going to go with one of the MFJ digital readout units with the knobs on the front, but why? For about 2/3 more than one of those, you can get this one, which gives you a zoomable graphical color display and MANY more tools than the MFJ. I'm always going to have one of these.Last night, I took my 20m dipole off the fence where I had it and hooked it up to some paracord I managed to get up into a tree about 33'. Initially tuned to 14.26mHz, after raising it, this analyzer shows that it now sits at 15.1mHz, resonant. While it's annoying to know that I should probably cut new legs now (perfection and all, even though I have a tuner), it was fascinating to see what a bit more altitude does to an antenna, and it was this analyzer that showed me that. I would buy this tool again in a heartbeat... but a slow heartbeat since I'd have to save up for it again.CON: The box it comes in does not hold it securely, and it comes with no case. That worries me. I admit, it's very annoying to spend in the ball park of $470 on a tool that comes without the slightest bit of protection. I'll get a Nanuk 904 case with the foam for it.
UPDATE TO THIS REVIEW: My original review, below, remains true, as far as the operation of this instrument is concerned, but I'm updating this, since a fitment problem cannot be resolved. Unfortunately, even with two attempts from Amazon, the problem with the case prevails. I am yet to get a replacement for the case that I received as part of this listing, which is too small. They, Rig Expert, definitely have a manufacturing problem, which remains to this day. I will purchase a non-standard case, at my , additional, expense.ORIGINAL REVIEW TEXT: Once I read the user's manual, thoroughly, I became very pleased with this instrument. This is a professional-quality device, and fron the outside appearance, it appears to have been built to high standards. I am an electronics engineer, and a ham, so I have been able to rigorously test this device, and it performs 100 % in accordance with its specifications. I highly recommend buying this, if your budget man Stanton thr hit. It IS expensive. So, what is not to like? Well, the so called MMI, Man-Machine-Interface, has the same shortcomings that all instruments with multi-function keys/buttons have. There are basic functions associated with each button, plus functions that are available if you press a specified pair of keys simultaneously, and a main menu and sub-menus that you must use to select the type af analysis you want to perform, etc. Fortunately, RigExpert has lessened this issue by incorporating a help page for every key, or key sequence. Regardless of what you are doing, you simply press the help key... I did not reduce my rating due to having to do so many things with so few keys. Plus, RigExpert deserves a little slack on this typical issue, because it performs so many functions. Okay, here is an issue. The liquid crystal display is back lit. And, as is the case with so many displays of this type, it is difficult to see what is being displayed if it is bright outside. And, totally unreadable in direct sunlight. You can barely read it if you shield it if the sun is bright. This is partially resolved by using it in the contrast mode, that displays in only black, gray, and white. However, I have passive displays where the readibility gets better with brighter light. And, they can be LED lighted. I own a ten dollar calculator and a twenty dollar VOM that have this type of didplay... Okay, getting good color in sunlight is a problem. I can't say much about charging the device, because after using it for the equivalent of four full days, the device indicates that it is fully charged. Nice...I didn't realize this was a kit, with many items included, even a real printed on heavy paper color users manual! The whole analyzer "kit" includes: The RigExpert AA-230 ZOOM A USB Cable An N to SO-239 Adapter Users Manual Batteries Soft Case, with clear window, probably all vinyl All packaged in a nice special cardboard containerAbout the case. The one I received with my RigExpert is too small to get the RigExpert into. Amazon is solving the problem, as usual. They are having a replacement case sent to me. Nice.A nice feature I discovered is that you can select individual ham bands to run an swr sweep on. Hint, in Setup, you must select which country you are in, or you will get the factory selected bands.
This meter is excellent, it takes all the guesswork (and hard work) out of matching my antennas. Instructions are clear and getting started within minutes was easy. The unit came with a case and batteries as well. Money well spent for all the aggravation that it saves on. My only wish is that a dead short and 50ohm non reactive load were offered with it instead of having to engineer my own.

View all reviews

RigExpert AA-35 ZOOM HF Antenna Analyzer (60kHz - 35MHz)

$249.95  in stock
Buy Now
Best cheap antenna analyzer: Reviews and buying advice 2 Amazon.com
as of December 18, 2019 6:41 pm

Features

Item Weight1.68 pounds
Package Dimensions10 x 6.7 x 3.4 inches
Item model numberAA35zoom
Batteries2 AA batteries required.

Frequency range: 0.06 to 35 MHz; Measurement for 25, 50, 75 and 100-Ohm systems; SWR measurement range: 1 to 100 in numerical modes, 1 to 10 in chart modes; Connector type: UHF (SO-239); Dimensions: 103 mm x 207 mm x 37 mm (4.1 in x 8.1 in x 1.4 in)

User reviews

One of the best graphical antenna analyzer values on the market today. I really like the color screen and easy-to-read graphics. However, when used outdoors the screen is VERY difficult to see in direct sunlight. You'll need shade. The speaker volume isn't very loud. The included carry case is very nice.
This is a "must have" for any ham. Comes with a usb cable, the software is downloadable from RigExperts site and is very useful.Also not that R.E. states they will not honor their warranty if purchased from a non-authorized dealer and specifically mention Amazon and ebay.
This is the best antenna analyzer. It really shines when you hook it up to a laptop and see how the antenna performs over the entire spectrum. Have a question about your coax or a connector? This analyzer does time domain reflectometry which means you can examine the status of your connection as a function of the distance from the analyzer. Have a problem connector after 50 feet of coax? This analyzer will pinpoint it. More importantly, this analyzer is not going to give you weird and bizarre readings just because there is a lot of RF in the shack (as some other analyzers will do).

View all reviews

50KHz-900MHz Vector Network Analyzer Kit MF HF VHF UHF Antenna Analyzer with Digital LCD Display Touching Screen

$56.99  in stock
Buy Now
Best cheap antenna analyzer: Reviews and buying advice 2 Amazon.com
as of December 18, 2019 6:41 pm

Specification: PCB: 54mm x 85.5mm x 11mm (without connectors, switches) Measurement Frequency: 50KHz ~ 300MHz (50KHz -900MHz, enable extended firmware) RF output: -13dbm (maximum -9dbm) Measurement range: 70dB (50kHz-300MHz), 60dB (300M-600MHz), 50dB (600M-900MHz) enable extended firmware); Port...

User reviews

No real users manual is available.
no problem

View all reviews

Some Review & Helpful Information video resource:

FAA-450 Antenna Analyzer Quick Review.

I wish I could afford the RigExpert AA-600, but the EU1KY FAA-450 might just work well enough for me, at practically a third of the price.

#191 Optimizing Antennas using a cheap N1201SA VNA (Vector Impedance Analyzer), LoRa, Review

Knowing how your antennas work or build and optimize our antenna is very rewarding. Unfortunately, it needs knowhow and some costly equipment to do that.


We hope that our list helped you find your product. please leave a comment and share if you found this article helpful

Leave a Comment