Best cheap blow off valve: Reviews and buying advice 1

Best cheap blow off valve: Reviews and buying advice

Are you looking for cheap blow off valve ?. Here are our pick for cheap blow off valve. You can quickly check the list below and scroll down for the detail list to read more detail about the product and reviews from other customers.

Quick list for comparison:

Detail List for cheap blow off valve:

Turbosmart TS-0203-1061 Blow-Off Valve

$150.05  in stock
Buy Now
Best cheap blow off valve: Reviews and buying advice 2 Amazon.com
as of December 20, 2019 10:03 am

Features

BrandTurbosmart
Item Weight6.4 ounces
Package Dimensions5 x 3.6 x 3.5 inches
California residentsClick here for Proposition 65 warning
Item model numberTS-0203-1061
Manufacturer Part NumberTS-0203-1061
OEM Part NumberTS-0203-1061
FoldingNo

Turbosmart TS-0203-1061. Turbosmart recommends that a boost gauge be permanently fitted to the vehicle

User reviews

 Perfect replacement for the factory plastic recirculation valve on my 2017 ST. Very high quality.It’s LOUD and always there. Every shift. Every time you let off the throttle. I think it might get annoying, but time will tell. I cannot take stars off for that, as it’s personal preference.All you do is remove the passenger front wheel, and it’s accessable through the wheel well. Get a couple long extensions and a ball-head 5mm Allen socket. It only took me about 25 minutes to install.I installed this along with a green filter (also purchased on amazon) and they work great together!EDIT:I took this thing off after about a year of sounding like a 38 year old teenager infatuated by the Fast and Furious movies. It’s that loud and annoying. I even ran a true vacuum source to it, and it was still too much.I ended up putting a Mountune BPV on. Now it’s quiet again.
17' Focus ST here. Okay, so I received my turbosmart blow off valve today and I immediately wanted to install it. I watched a YouTube video first, if you're curious I typed in "blow off valve installation Focus st" and it should be the first one buy the name of 'CJ Pony Parts'. That video was pretty clear and explains everything very well. Installation was a little tricky just because of how far in the stock BPV is located. I've included a picture of the ratchet set I used. (Bag of chips for scale and tape measure) It was a 5mm Allen head socket, 3/8 Drive with a lot of extensions on the end. Using that I was able to get to all the screws. BE PATIENT and take your time because it's definitely tricky. When you get the stock BPV unbolted be careful taking it out because it has 3 parts, the top, the spring in the middle and the bottom, it was simple pulling it out just be careful. Installation took me 40 minutes which I thought was pretty good. Once I had everything tight and the vacuum hose reattached I started it up and was absolutely thrilled with the way it sounds. So much better and it's pretty loud even when you don't really get on it. All in all this is an AMAZING product by turbosmart and if you have a Focus ST I suggest you invest because you will not be disappointed. Thank you for a great product!! Very satisfied.
I have to admit. I always wanted to have a car with turbo, being a fast and furious generation that was kind of my dream, however well live happends and I was never able to have a car with turbo until now or kind of. I got a ford escape 2.0T there isn't much to say about the car or the engine, if you push it it makes a small psst. But lets be honest, that is not what we like do we? I wanted the full PSSSSsssttt pstttt and damn I got it.I spent about an hour installing it, it is not difficult, but by sure you will need at least some tools and probably a good lamp. I'm pretty sure I messed up with the spring because I think it releases way to easily, even a very low rpms but that is a different topic. After installing it I went to drive around the block and believe me it really makes people turn they head expecting a 1000hp supra and finding out a cheap suv driven by a guy with a creepy smile.I seriously tough about removing it because of the "attention" it gets but damn, I really like it. Makes my daily commute a more pleasant drive, people will judge you? by sure, do you care?

View all reviews

Dewhel Blow Off Adaptor For BMW Mini Cooper S Peugeot 1.6 Turbo Engines BOV Atmospheric Dump valve spacer kit

$19.99  in stock
Buy Now
Best cheap blow off valve: Reviews and buying advice 2 Amazon.com
as of December 20, 2019 10:03 am

Features

BrandDEWHEL
Item Weight1.6 ounces
Package Dimensions3.9 x 3.2 x 2.3 inches
Item model numberDVMCS
Manufacturer Part NumberDVMCS

Dewhel's Blow off Adaptor is a sandwich type adaptor that fits between the existing electrical solenoid and the turbo charger housing on the BMW Mini Cooper S N14 engines 2007/08(R56/57 *), Peugeot 1.6 turbo engines as found in the 207 and GTI , 208 GTI, 307, 308 and Citroen DS3.

User reviews

Definitely works like it's supposed to. I've had multiple cars with turbos and BOV's (SRT4 with adapter plate, Saab 9-3 with Forge BOV, Saab 9-5 that I relocated the MAF sensor so I could run a Forge BOV, Audi S4 with upgraded diverters, etc). This isn't as loud because it's still stock boost on the MINI, and because it's just an adapter to the stock diaphragm-type bypass valve. But it does the job👍I've got a 2014 manual transmission MINI Countryman S All4 with the N18, so the install was not nearly as easy as the automatic transmission N14 that this adapter was made for.In the pictures, where I circled in red, you can see that I had to use my grinder/cutoff wheel and shave off some of the adapter AND the OEM diverter valve on the edges. The wastegate actuator & the line coming off the turbo don't give you much room to play. It also took awhile to get the old bolts out and to get the new bolts back in because of this.If I hadn't dropped a non-magnetic extension between the turbo and the engine and contemplated my life for awhile before finally finding a way to get it out, it would have taken me about 1 1/2 to 2 hours to do from start to finish.
As many have said, takes a little DIY for the N18 application. You will need to file down one of the mounting points in order to clear the turbo. I simultaneously upgraded my old diverter valve with the newest OEM model that gets rid of the rubber diaphragm for greater durability. I have driven a few 1000 miles and have had no problems with CELs or the car going into Limp mode. Also to note,on reinstallation I highly recommend getting a set of long reach ball head hex sockets. These will allow you to reach the hex screws much easier as some are hard to reach
Fit fine and was easy to install on my 2008 Mini Cooper. I actually got this for the sound so that I could tell if my diverter valve was working. It's not loud, but just enough so I can tell at any time if there are any issues with the valve working. Other than power loss and taking it apart, it's hard to tell.

View all reviews

RKX Blow Off Valve Spacer BOV for VW AUDI - TSI FSI TFSI MK5 GTI B7 2.0T 2.0 T Diverter DV

$35.95  in stock
Buy Now
Best cheap blow off valve: Reviews and buying advice 2 Amazon.com
as of December 20, 2019 10:03 am

Features

BrandRKX
Item Weight5.6 ounces
Package Dimensions2.5 x 2.5 x 2.5 inches
Item model number4348479333
Manufacturer Part NumberRKX DV spacer
FoldingNo

Make sure this fits by entering your model number.; RKX Hybrid Diverter valve spacer. This will give your vehicle the traditional BOV sound will retaining the stock DV; Fits VW and Audi 2.0t FSI & TSI engines from 2006-2013; Engines are found in: Jetta, GTI, GLI, Passat, Tiguan, A3, A4, Q5;...

User reviews

 If you want a blow off valve sound on your Audi, this DEFF does the trick. I took a chance on this one, and it 100% does the same exact thing as a Forge or GFB spacer. Same sound, same spacer - different name, and 1/4 the price. I attached a video of the sound you get. If you want the turbo PSHHT when you release throttle, this sure does it. Having an intake makes the sound much better, imo.. but it is still awesome even without an intake. No CEL, and no crazy side effects (at least on my B7 2.0) .. just buy it. It’s cheap enough that if you hate it, you can take it right off and not be upset about what you spent on it. I’m very pleased. If you are even looking at this, you will likely will be happy with it too.
Just orderd this 2 weeks ago just recieved it and put on my 2007 vw gti and i am more than satusfied with the product and quality and produces a really good blow off sound l!
Overall the product sound great. It's not unbearably loud or obnoxiously with it's tone. As a fair warning, if you have an aftermarket 'plunger valve' such as the DV+ from Go Fast Bits, you'll need to purchase longer installation screws. You'll need to get M6 x 50mm or longer screws to go with it for an additional couple of bucks.Additionally, installation was quite easy for me because I did a diverter valve relocation to right beside the throttle body last year, which makes this a 5 minute task to swap valve spacers, but I can probably imagine installation with jacking your car up and getting to the valve itself is easily a 60-90 minute task each time you want to put on/take off the spacer.

View all reviews

PQY Blow Off Valve Spacer BOV for VW AUDI - TSI FSI TFSI MK5 GTI B7 2.0T Diverter DV

$20.00  in stock
Buy Now
Best cheap blow off valve: Reviews and buying advice 2 Amazon.com
as of December 20, 2019 10:03 am

Features

BrandPQY
Item Weight3.52 ounces
Package Dimensions0.4 x 0.4 x 0.4 inches
Manufacturer Part Number5748BK

Application:for VW and Audi 2.0t FSI & TSI engines from 2006-2013.Engines can be founded in: Jetta, GTI, GLI, Passat, Tiguan, A3, A4, Q5Compatible Engine Codes: BPG, BPY, BWT, CAEB, CBFA, CCTACompatible Diverter Valves: 06F-145-710B06F-145-710C06F-145-710G06H-145-710D

ECCPP Turbo Blow Off Valve Fit for UNIVERSAL TYPE-RS

$33.79  in stock
Buy Now
Best cheap blow off valve: Reviews and buying advice 2 Amazon.com
as of December 20, 2019 10:03 am

Features

BrandECCPP
Item Weight1.15 pounds
Product Dimensions6.3 x 3.9 x 3.1 inches
Manufacturer Part Number103939-5211-1747344381
Vehicle Service TypeUniversal TYPE-RS

Fit For: UNIVERSAL TYPE-RSPackage Includes: 1 x Blow Off Valve 1 x Aluminum Flange

Some Review & Helpful Information video resource:

$20 Ebay Dual Port BOV 2015+ WRX Part 1: Unboxing / Fitment Test

Link to my Amazon store (2015+ WRX Products): ...

TiAL BOV Real vs Fake (Tear Down and Sound)

We've got a fun little experiment today, how well does a knockoff Tial bov compare to the real one? Lets find out by taking both apart and hearing them in a head ...


We hope that our list helped you find your product. please leave a comment and share if you found this article helpful

Leave a Comment